重庆“朝天扬帆”钢结构工程风振研究

“朝天扬帆”是位于重庆朝天间广场的钢结构雕塑工程,该工程建筑型体复杂、结构布局不规则,通过该雕塑工程缩尺模型的几洞试验,确定其风载计算的体型系数;用时程法计算结构的风振响应,且在模拟作用于结构上的脉动风时程曲线时考虑结构的高度相关性,应用ALGOR93软件对结构进行风振时程分析,并自编程序加以前、后处理。通过对比该结构在脉动风和平均风作用下的杆件内力、节点位移响应,约定结构风振系数,为该雕塑工程抗风设计参数的确定提供理论依据。     

埋入压电元件的自诊断智能结构的理论分析与实验研究

将压电元件埋设于复合材料层板结构中，可实现结构应变分布的在线监测。本文提出一种采用压电应变传感器阵列和人工神经网络模型的自诊断方法，对局部埋入压电应变传感元件的平板结构进行了分析，采用神经网络模型根据压电传感器组的输出识别结构承载位置和大小，对该方法进行了数值模拟和实验验证。     

Determination of Salt Diffusion Coefficient in Brick: Analytical Methods

This paper presents an investigation into salt diffusion in new, fully saturated brick under isothermal conditions. A commonly used experiment methodology, diffusion cell method, is adopted. The analytical and numerical solutions are obtained. The analytical solution is simple and straightforward, which determines temporally salt concentrations in the monitored chamber. It enables us to estimate salt diffusion coefficients in a fast and accurate way.     

含压电层的功能梯度柱壳的自由振动分析

基于三维弹性理论，导出了带有压电层的圆柱形梯度壳的动力学方程以及相应的边界条件，用幂级数展开法得到了求解该圆柱形梯度壳自由振动的三维精确公式．通过实例模型求解了该壳体的自由振动的固有频率；分析了不同电学边界条件对壳体的振动频率的影响。结果可评估各种近似理论解和数值解的正确性。     

Scaled-boundary method in electroelasticity of thin plates

The paper discusses the scaled-boundary method as applied to electroelastic problems. As an example, the stress-intensity factor is calculated for a thin rectangular piezoelectric plate with an edge crack __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 7, pp. 124–134, July 2006.     

基于吸力量测确定膨胀土活动带和裂隙深度

采用M itchell公式和裂隙扩展深度方程两种吸力法确定安康地区膨胀土大气影响深度和裂隙开展深度。其一通过对安康地区两处天然边坡开挖观测井,利用张力计进行不同深度处吸力值的现场量测,根据M itchell提出公式计算大气影响深度;其二根据非饱和土抗拉强度公式,建立膨胀土裂隙扩展深度方程,利用基质吸力量测结果求其理论解。结果表明,安康地区膨胀土吸力变化曲线随深度增加变幅减小,呈“波浪式”推移。M itchell公式确定安康地区膨胀土的大气影响深度为3.35m以内,裂隙深度方程确定裂隙开展深度为3.06³.14m。利用M itchell公式计算大气影响深度与膨胀土断裂理论公式确定的裂隙开展深度结果接近。     

An improved scheme for determining heat transfer correlations from heat exchanger regression models with three unknowns

A nonlinear regression scheme for determining heat transfer correlations from overall heat exchanger measurements is presented. The proposed scheme is valid for any two-fluid heat exchanger data where only one fluid's thermal resistance varies. The resulting regression model has three unknowns; two are associated with the variable resistance, and the third is the sum of all other resistances. The model can be analyzed only by using nonlinear regression because it cannot be transformed into linear form. Unlike existing approximate methods of analysis (known as modified Wilson plots), the proposed scheme is guaranteed to converge if a solution exists. The scheme was successfully tested by analyzing data collected on a tube-fin heat exchanger with continuous plain fins.     

T-STRESS IN PIEZOELECTRIC SOLID

The non-singular and bounded terms for stresses near the crack tip were investigated. The crack problem in a transversely isotropic piezoelectric solid for the plane problem was dealt with. The principle of superposition and the Plemelj formulation were introduced. The non-singular terms are given by solving Rieman-Hilbert problem. It is shown that the non-singular terms are influenced by the elastic and electric constants.     

Diffusion of moisture in deformable porous media. Anisotropic fibrous materials

This paper presents a study on the deformation of anisotropic fibrous porous media subjected to moistening by water in the liquid phase. The deformation of the medium is studied by applying the concept of effective stress. Given the structure of the medium, the displacement of the solid matrix is not taken into account with respect to the displacement of the liquid phase. The transport equations are derived from the model proposed by Narasimhan. The transport coefficients and the relation between the variation in apparent density and effective stress are obtained by test measurements. A numerical model has been established and applied for studying drip moistening of mineral wool samples capable or incapable of deformation.Nomenclature D mass diffusion coefficient [L²t^–1] - e void fraction - g gravity acceleration [Lt^–2] - J mass transfer density [ML^–2t^–1] - K hydraulic conductivity [Lt^–1] - K _s hydraulic conductivity of the solid phase [Lt^–1] - K ^* hydraulic conductivity of the deformable porous medium [Lt^–1] - P pressure of moistening liquid [ML^–1 t^–2] - S degree of saturation - t time [t] - V speed [Lt^–1] - X horizontal coordinate [L] - Z vertical coordinate measured from the bottom of porous medium [L] - z z-coordinate [L] Greek Letters porosity - ₁ total hydric potential [L] - _g gas density [ML^–3] - ₁ liquid density [ML^–3] - ₀ apparent density [ML^–3] - _s density of the solid phase [ML^–3] - density of the moist porous medium [ML^–3] - external load [ML^–1t^–2] - effective stress [ML^–1t^–2] - bishop's parameter - matrix potential or capillary suction [L] Indices g gas - 1 moistening liquid - p direction perpendicular to fiber planes - s solid matrix - t direction parallel to fiber planes - v pore Exponent * movement of solid particles taken into account     

双周期裂纹压电材料反平面剪切问题断裂力学分析

研究压电材料双周期裂纹反平面剪切与平面电场作用的问题．运用复变函数方法，获得了该问题严格的闭合解，并由此给出了裂纹尖端应力强度因子和电位移强度因子的精确公式．数值算例显示了裂纹分布特征对材料断裂行为的重要影响．叠间小裂纹能够对主裂纹的应力和电位移场起着屏蔽作用，相反行间小裂纹却起着放大作用，至于钻石形分布裂纹的影响规律则更为复杂．对于某些特殊情形给予了解答并导出一系列有意义的结果。